Product page_Hero image_Scanreco_FSAR-AN

Double analogue slope sensor

Efficient and reliable double analogue slope sensor on one axis with redundant technology

Our FSAR-AN double analogue slope sensor features 4-20mA current outputs and is referred to as "double" due to its composition of two completely independent sensors.

This redundant device operates on a single axis, with both outputs referring to the same measurement on the "X" axis.

The standard operating angle is ±60°, though it can be programmed to meet specific requirements.

Get into the specifics

Technical information about FSAR-AN

Technical information
  • Power Supply Voltage: 10 - 30 VDC 
  • Working ambient temperature: from -40 to +70 °C / -40 - 158F
  • Overall dimensions (+ connector): 130 x 110 (+37) x 38 mm / 5.1 x 4.3(+1.47) x 1.49 in
  • Drilling interaxis: 119 x 99 mm / 4.6 x 3.8 in (no. 4 M5 screws)
  • IP-Class: IP68 
  • Weight: 490 g / 1.0 lbs
  •  Working range: from -60° to +60° (standard)
  • Resolution: 0.021 mA / 0.16 degrees
  • Max Current absorbed with output short-circuited: 42mA (at 20mA as output) / 26mA (at 4mA as output)
  • Max output voltage drop: Valim - 5.5V

Similar products